How To Program Garage Door Opener – Linear garage doors can be programmed to open and close with the use of a keypad located outside the garage or remote control. When using the keyboard, the user enters a programming code to control the door. The remote control has a special code that is linked to the garage door, once it has been programmed. Several remote controls can be programmed to work with a garage door.
Write down a six-digit passcode that you want to use to open the door. You only have 15 seconds to enter the code. Press the “Learn” button on the operator control box for garage doors. Enter the code by pressing the numbers on the keypad and pressing the “Start / Stop” button. Test the code by closing the garage door and enter the combination on the keyboard.
Activate the programming mode in the operator control cabinet for garage doors by pressing the “Learning” button. Press the button on the remote control that you want to operate the garage door. The light on the engine control unit will flash once. Test the remote control by pressing the button you have programmed. If you do not control the door, repeat steps 1-2. Repeat steps 1-3 on any additional remote control you wish to program. The remote controls must be programmed one at a time.